gaslevel® with external display and led indicator
GASLEVEL® with external display is specially designed to meet the needs of campers and caravan enthusiasts. The external reserve display for gas cylinders looks exactly the same as its "big brother", GASLEVEL® Classic. However, the smaller device measuring 6.5 cm high, 3 cm wide and 1.6 cm thick is also fitted with a 3-metre cable which connects it to a display, as well as possibility to extend the cable to 8 or 13 metres.
Two neodym magnets in the level sensor allow it to be placed randomly on the attached metal gas cylinder, where it remains fixed in place. The display with the LED indicator is mounted in any desired position for good visibility and is connected to the level sensor by means of the cable. While the sensor is up against the gas-filled section of the cylinder, a gas cylinder with a green LED light is shown on the display. As soon as the sensor reaches the empty area, the display switches to red.
The product can also be used like the GASLEVEL® Classic as a level indicator with the sensor directly up against the gas cylinder. GASLEVEL® with external display therefore combines two functions in one product.
Manufactured using modern production facilities in Iserlohn, GASLEVEL® with external display corresponds to EU Directive EMC 2004/108/EC and is also approved for use in potentially explosive atmospheres (EX * II 3 G Ex nA IIA T3).
areas of use
Owners of caravans and motorhomes will especially benefit from GASLEVEL® with external display. Campers can constantly keep an eye on the current level of their gas cylinder due to the fact that the display indicator can be mounted in any chosen spot in the camping van, connected to the level sensor by means of cable.
First of all, choose a suitable place to mount the display indicator and set up a 12-/24-volt power connection. Then attach the sensor with the cable to the gas cylinder currently connected in your gas cylinder compartment and run the cable from there to the LED display inside the caravan. The level of your gas cylinder will be shown on the display.
Ideally you should place the level sensor as low down on the gas cylinder as possible so that the LED display really only turns red when the gas is about to run out. Please be sure to attach the sensor vertically and place it flat up against the cylinder.
Gas cylinder is empty
The display switches to green:
Gas cylinder is filled
- ABS plastic housing
- Ultrasonic level measurement
- Produced in Iserlohn / Germany
- Dimensions H / W / T: 65 mm / 30 mm / 16 mm
- 3-/8-/13-meter connection cable
- Display with LED indicator
- Sensor: II 2G Ex ib IIB T4 / Display: II (2) G [EX ib] IIB
You can download the operating instructions here.
The handy and compact GASLEVEL® Classic measures the fill level of gas canisters within seconds.
Developed for the international market, GASLEVEL® Stick precisely indicates the fill level of a gas canister.
GASLEVEL® with external display
GASLEVEL® with external display shows the amount of gas left in the connected canister by means of an LED indicator.
Other vehicle manufacturers also benefit from our precision, reliability and on-time delivery.
Self-locking fuel caps for Harley-Davidson meet the very highest standards in terms of technology and visual design.
The universal LCD gear display knob INDY-CATOR is an absolute innovation in the automotive market.
Various LED fuel gauges designed for traditional motorcycles to meet modern needs.
Our very own patented solutions combine high-tech with an authentic, classic design.
The waterproof, unbreakable LED light GASLIGHT® will shed some light in the darkness for gas bottle lockers.